Portable oxygen purity analyzer sensor medical gas oxygen concentration analyzer | INNORKOM

It uses oxygen sensor, designed to achieve fast response, maximum reliability and stable performance. It is mainly designed to continuously monitor the oxygen level delivered by medical oxygen delivery equipment and respiratory care systems. Adjustable high and low level alarm set up set point, make PIGEON III ideal for newborns, anesthesia and respiratory care.

Technical Parameter

◆ Display Range: 0%～100%

◆ Measurement Accuracy: ±2.5%FS

◆ Measurement Resolution: 0.1%

◆ Alarm: Upper Limit of Oxygen Concentration Aalarm: 100% lower limit of oxygen concentration alarm: 0% battery low voltage: lithium battery (3.5±0.1) V

◆ The Influence of Residual Current: Zero offset <0.2%

◆ Stability: The instrument runs continuously for 6 hours, drifting ±2.5%

◆ Repeatability: Relative standard deviation ≤ 1%

◆ Power-on Time <5s, Total system response time <30s

◆ Power Supply: DC3.7V lithium battery

◆ Suitable for continuous monitoring of the oxygen concentration delivered by patients from newborns to adults . It can be used in front of hospitals, hospitals and subacute environments.

◆ High and low oxygen concentration alarm

◆ "LOW BAT" low voltage audible alarm

◆ 21%, 100% oxygen concentration calibration

◆ Oxygen battery sensor life: >1,000,000% O 2 H

◆ 3.7V lithium battery power supply, easy to carry.

◆ Type C charging, battery charge and discharge times: 500 times

◆ Pocket type, small size and easy to use.

FAQ